LIGHT GAMES is a collection of premium low-voltage pendants, spots, wall sconces and downlights designed to enhance and complement our Steng and Universo lighting families. Fixtures feature hand blown murano glass in a variety of seductive colors as well as well-refined metal finishes. The highest quality is assured as each product is assembled by hand and individually inspected for quality and performance in our Swiss manufacturing facility.
LIGHT GAMES pendants reflect much of the same stylistic flair as our most popular Universo cable lighting fixtures. As Light Games features the unparalleled convenience of the Steng plug-in mounting system, fixtures can be easily interchanged by hand allowing for unlimited flexibility.
Fixtures can be mounted as monopoint installations via a selection of various flush mounting canopies. Light Games is also fully compatible with the Steng, Universo and Rosen track systems, which opens even more possible applications for these beautiful fixtures.
A typical LIGHT GAMES TRACK SYSTEM INSTALLATION should include one or more of the following components:
- Transformer (12V) (300W)
- Powerfeed (Center/Right/Left)
- Track (One or Two Circuit)
- Fixture
- Fixture Track Adaptor
- Connectors (Conductive/Non-Conductive)
- Suspension or Spacer
- Lamp
- Track Dead End
Light Games track sections are available in 2', 4', 6', 8' and 10' sections. Choose from White, Black, Matte Aluminum or Polished Aluminum finishes. Tracks are also available as a One (12V) Circuit or Two (12V) Circuit system. Remember to use the corresponding parts for either system as the parts are not interchangeable between the One and Two Circuit versions of track. Basically, the One Circuit track allows 300W to be put on the track run whereas the Two Circuit track allows 600W to be put on the track run (thanks to its dual circuit power output). Choice of track will be determined by the desired quantity of fixtures.
Light Games track can be suspended or flush mounted to the ceiling with spacers. Suspensions and spacers should be used every 3'.
Power is supplied by remotely mounting a transformer and connecting a pair of field-cuttable flexible insulated powerfeed cable to the track feed connection, which can be either at the center, right or left end via a standard 4" junction box covered by a 5" dia decorative canopy.
With the use of an adaptor, Light Games fixtures are also compatible with our Universo Cable Lighting System as well as our Rosen Monotrack Systems.
Note: Cross-system compatibility only applies to fixtures that utilize the Steng (jack to socket) mounting system. For more details on these systems, please visit their respective product pages.
IMPORTANT NOTE: For pendant fixtures, exact cable lengths (or cable drops) must be specified if different from the standard length of 39.4" (as the cable is not field cuttable).
LIGHT GAMES is fully certified by ETL as safe for indoor use and should be installed by a qualified electrical contractor according to National Electrical Code guidelines.
For specification assistance, please contact our friendly in-house quotation department by email: customerservice@lightproject.com or by calling: 703-674-0380 or faxing: 703-674-0388. With adequate layout information, our in-house design staff can provide a complete bill of materials for your next Light Games project.
FIXTURES
